jaguar-inverter-cub3a-1.png

* Đặt điểm:

IMO Jaguar Cub Series AC Frequency Inverter for 2.2kW (3HP) 230V 3 Ph motor to 11A. Operates in VxF or Sensorless Flux Vector control and converts single phase 230V input to three phase 230V for a standard AC Induction motor

Dimensions: Size 3  140mm Wide x 141mm Deep x 180mm High.
Enclosure Rating: IP20.
Weight: 2.9kg.

Overload: 150% x 60 seconds, 200% x 0.5 seconds.
Speed Control Range: 0-400Hz.
Braking: To 40 Ohm minimum external resistor (not supplied), see the Resistor options linked below or use the 'Which Resistor' button on this page.

Features: 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 2 Digital Output, 1 Relay Contact Set. RS485 / Modbus RTU (optional).
Input Current: 24.8A.
Input Voltage: Single Phase 200-240Vac at 50/60Hz.
EMC Filters: None

Mounting: Cubicle mount via 4 x 5mm diameter holes at rear on 168mm x 128mm centres, or onto 35mm DIN rail when the optional rail mounting base is added.
Ambient: Rated 50°C.
Ventilation space in front: [Not Specified].
Ventilation space above and below: 100mm.
Ventilation space at sides: 0mm at 40°C Ambient, 10mm at 50° Ambient.